FLK02 – FLEX Full Kit HW
Use your FLEX to easily tune, reprogram, upgrade or modify the software of most control units directly through the OBD socket of the vehicle. An internet connection gives you access to all the potential that the tool offers you.
For advanced and repairing jobs, use the Flexbox module to program your control unit in BDM, Bootloader, JTAG and AUD modes. The device detects eventual connection or communication errors thanks to the concept of its state-of-the -art design.
*OBD protocols package will be released in the future.
SW Packages List
|#||SKU code||SW packages||Price List*|
|1||FLS0.10M||Software Flex BL Tricore+Bench Bosch MEDC17 – MASTER||Vehicle List|
|2||FLS0.1M||Software Flex ECU OBD + Bench Bosch MEDC17 – MASTER||Vehicle List|
|3||FLS0.2M||Software Flex TCU (car, bike, van) – MASTER||Vehicle List|
|4||FLS0.3M||Software Flex BDM MPC5XX – MASTER||Vehicle List|
|5||FLS0.4M||Software Flex BL Nexus MPC5XXX – MASTER||Coming Soon|
|6||FLS0.6M||Software Flex JTAG Renesas SH705X – MASTER||Vehicle List|
|7||FLS0.7M||Software Flex BL Infineon C165/166/167 – MASTER||Coming Soon|
|8||FLS0.8M||Software Flex BL ST10 – MASTER||Coming Soon|
|9||FLS0.9M||Software Flex JTAG NEC 76F00X – MASTER||Vehicle List|
FLS0.10M – Software Flex BL Ticore+Bench Bosch MEDC17 – MASTER
With the Full Bench MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit.
You will never damage a BOSCH MEDC17 ECU again:
- ONE, because you will no longer need to open it;
- TWO, because you will no longer have to solder or use a bench to connect to it.
With the Full Bench MEDC17 Software package your interventions will always be safe and reliable over time. You will have complete backup reading even of the EEPROM without having to open the unit just in case you need to bring the ECU to original conditions.
After the first year, the subscription fee for the Full Bench MEDC17 Software package for FLEX will be 500€ for a MASTER tool.
FLS0.2M – Software Flex TCU – MASTER
The Flex TCU SW Package allow full read and full write of the TCU, including each of the memories stored inside the transmission control unit without any encryption. It just doesn’t require to open the control unit, while allowing exactly the same functions as a regular boot mode. Tuning, align, bypassing security and restoring backup are no issue at all. The different is the fact that files are non encrypted and that the speed has been generally been improved.
Furthermore, you do not need to make any ignition switch, as Flexbox will take care of it. Reading times have been tested from 2 to 3 minutes in total, depending on ECU model. Writing times depend on actual size of modification inside file, from few seconds to about 9 minutes.
|1||FLK35||1||Cabling kit: FLX3.5 color coded wiring harness|
|2||FLK42||1||Adapter kit: 6 pcs set of pin adapters to FLX4.2|
|3||FLX1.1||1||FLEX Base Module|
|4||FLX1.9||1||FlexBox Module for FLEX|
|5||FLX2.10||1||Connection cable OBD: FLEX to CAN/Kline RED|
|6||FLX2.11||1||Connection cable OBD: FLEX to ENet GREEN|
|7||FLX3.9||1||Connection cable: USB 2.0 AM-BM BLK 1.8m|
|8||FLX4.9||1||Power Supply adapter 110-240V 14V 5A|
|9||FLX3.3||1||Connection cable: FlexBox port C to NEC 7F00 XX|
|10||FLX3.4||1||Connection cable: FlexBox port D to BDM MPC5xx|
|11||FLX4.1||1||FlexBox port E 40 pins adapter for FLX3.5|
|12||FLX9.1||1||Flex & FlexBox diagnostic adapter|
|13||FLX8.10||1||FLEX Branded Box|
|12V 5A/24V 2.5A||ISO 15765:2 x CAN |
ISO 99141-2 & ISO 14230: 2 x K-LINE, 1xL-LINE
SAE J1850 PWM, VPW
|ESD 1kV |
USB galvanic separation
|Universal 15 In/Out ports |
Voltage standard: internal 3.3V, internal 5V, external 1.8 – 5.5V
JTAG, BDM, AUD, UART